How To Remove Fitbit Charge 3 Band

Irresolute the ring on a Fitbit device may seem like a simple thing to practise, but it can exist all too piece of cake to stop up in a fight with your new Versa two, Charge, Inspire HR or Ionic.

Customization is one of the real strengths of Fitbit's devices, so it's likely that you'll want to swap out the standard ring fairly before long after buying - or even just switch betwixt them 2 for the office and workouts.

For those struggling to do and so, though, nosotros're here to lend a helping hand. Beneath, we've got steps on how to change bands for each device, then read on to observe out everything yous need to know.

How to alter band on Fitbit Versa 2

Fitbit's latest smartwatch is the pinnacle of all its wares, merely trying to change the band on any of its Versa models tin be a bit of a trial.

We've chipped plenty of nails trying to forcefulness those tiny metal bars into place, listening for the lock, and unfortunately there's no easy fashion around that process.

Related: Best Fitbit Versa bands

Some bands are easier to switch than others, and all should work across the Versa 2, Versa and Versa Lite.

Also, hot tip: if y'all're switching betwixt the small and large bands, you lot only demand to modify the bottom half of the band – save yourself some hassle.

Switch bands on Fitbit Versa 2

1. Turn your Fitbit Versa or Versa 2 onto its front and find the two metallic release levers, located at the edge of each terminate of the band and locked into the smartwatch's casing.

2. To release the band, slide the pin on the lever inward, then pull the band away from the spotter.

iii. To attach a new wristband, slide the pin into the small notch on the watch. Then, as you lot fit information technology into one end, line it up with the other end and release the pin into place.

four. You should hear the two sides lock into identify, and the band should be stable.

How to modify ring on Fitbit Charge 3

Changing bands on the Fitbit Charge 3 and older Charge ii is actually very like, despite the bound made between generations in the pattern department.

That'southward because both feature the aforementioned strap mechanism on the actual tracker, and, like to the Ionic, switching both sides should actually exist very like shooting fish in a barrel.

Switch bands on the Fitbit Charge 3

one. Plough over the tracker onto its front and find the 2 latches – one will sit down on either side of the case.

2. To release, printing down on the flat push on the strap. As with the Ionic, you may accept to movement information technology effectually and lock properly earlier trying to un-snap it from the frame.

3. Then to adhere a new band, only slide it into the latch until you hear it snap into place.

Finding solid tertiary-party bands for this tracker isn't necessarily easy, so bank check out our best Fitbit Accuse 3 bands to purchase.

How to change band on Fitbit Ionic

The Fitbit Ionic is perhaps the easiest device to customise within the Fitbit family, with its clip arrangement helping y'all snap different bands into place in merely a few seconds. It'south easier than the Versa 2, that's for certain.

Switch bands on the Fitbit Ionic

1. Turn the Fitbit Ionic onto its front and locate the band latches – there'll be one on each stop for y'all to unclip.

ii. To release, button downwards on the flat button on the strap on both sides. Sometimes you may have to wriggle it effectually, perhaps lock properly into the spotter, before fully releasing it from the case.

3. To attach a new band, simply line it up with the latch on both sides and press in until y'all tin can hear it snap into place.

Demand some help finding more than bands to pair with your device? Bank check out the superlative Fitbit Ionic bands currently available.

How to change band on Fitbit Inspire HR

Changing the band on a Fitbit Inspire or Inspire HR is really very similar to the mechanism used on the Versa, with quick-release levers used.

It's non the easiest, and tin actually exist tough to lock into place, simply you'll get the hang of information technology.

Switch bands on Fitbit Inspire

1. Turn the tracker onto its forepart and locate the quick-release lever – one will be on each side of the tracker.

ii. If you desire to release that half of the band, push the lever inward and simultaneously pull the band away from the tracker. Repeat on the other side to terminate up with a ring-less tracker.

3. To attach a new strap, line the pin upwards with the hole in the tracker opposite the quick-release lever.

4 . Once it's tucked in on one side, push the lever in and do the same in guild to slide it into the other.

v. With both sides inserted, let go of the lever and give the band a quick pull to ensure it's all locked into place – you should hear a snap on the second pigsty.

How to change band on Fitbit Alta

Whether y'all're trying to modify the band on a Fitbit Alta HR or the regular version, the process is only the same.

And since this is Fitbit's sleekest and most fashionable tracker, with enough of designer bands at your disposal, rotating bands is an essential skill for any owner.

Switch bands on Fitbit Alta

1. Plow the tracker onto its front end and detect the two latches located where the band meets the module.

ii. To release either side, push button downward on the flat button on the strap and pull the band abroad from the watch.

three. Having issues? Push the band dorsum towards the frame and try to lock it back into place and restart the procedure.

four. In one case off, attach a new band by pushing it into the empty latch – you should feel it slide and click into place without too much endeavour.